Contact Us For More Information
Call (847) 687-2150 for more information, or fill out the form below to email us.
Check Out Our Work By Our Woodturners
This is a select few of our work done by our team here at Central Wisconsin Wood Turners.
WORK BY TONY KOPINSKI

TRIPLE WINGED BOWL WITH TURNED UP WINGS
4" high

DOUBLE TRIPLE WINGED BOWL WITH WINGS TURNED UP AND DOWN
6" high

CUTTING BOARD & ROLLING PIN
Cutting Board: 13" x 17"
Rolling Pin: 16"

SUMAC LIDDED VESSEL
7.5" x 5"

SOFT MAPLE BURL BOWL
7.5" x 10"

CURLER FRONT ROW / SKIER REAR LEFT / SNOWSHOER REAR RIGHT

CHERRY BURL BOWL
8" thick
that made it real hard to keep the cone & 2 feathers centered

TRIPLE WINGED BOWLS
8" thick
I love making triple winged bowls and wanted to see how small they could be. One has turned up wings just to try something different.

SNOWMEN IN ACTION, HOCKEY PLAYER (FRONT LEFT), SNOWBALL FIGHT (FRONT RIGHT), TOBOGGANER (REAR LEFT), TREE HARVESTER (REAR RIGHT)

CHERRY BURL LIDDED BOWL
8" x 6"

PLATE
15"

LIDDED BOX
4" x 3" x 3"

LIDDED BOXES
8" high & 6" high
Stacked doubles & both wings down

TWO FLOWERS IN A POT
12" high

MESQUITE BURL
6" x 4"

RED CEDAR
6" x 9"
Top is made from coffee grounds

WHITE OAK BURL
9" x 6"
Top is made from coffee grounds and glitter

WHITE BIRCH FUNERAL URN
8" x 6"

MUSHROOMS & PSYCHEDELIC MUSHROOMS

SNOWMEN IN ACTION
To be donated to Festival of Trees fundraiser for hospice.

CHERRY BURL URN WITH BOW TIE
13" x 6"
Bow tie in front and back to close cracks.

TAG ALDER BURL LIDDED BOX
5" x 3.5"

SPALTED BIRCH VESSEL
7" X 7"

DYED WOOD SHAVINGS & SUPER GLUE
7"
WORK BY JOE VARGA

HACKBERRY HOLLOW FORM
8" wide x 6" tall
1.50" opening
.25" wall thickness
Turned green / air dried

LACEWOOD BOX
3.25" tall
1.25" in diameter
Tube is hollowed out and the bottom is glued in.

LACEWOOD BOX
3.25" tall
1.25" in diameter
Tube is hollowed out and the bottom is glued in.

HOLLOWED OUR FLASK
2 7/8" wide
5 3/4" diameter
8" high
Maple, Sapele, and Brazilian Ebony

HOLLOWED OUR FLASK
2 7/8" wide
5 3/4" diameter
8" high
Maple, Sapele, and Brazilian Ebony

KUKSA CUP FROM SPALTED BEECH
3.5" high
3.5" diameter
5.5" long
Turned and finished with a bandsaw to make it look as though it was carved and then sanded and buffed with all 3 buffing wheels.

BOX IN A BLOCK
3 1/2" wide
5" long
3 1/2" high
Turned from one piece of spalted maple. 3" hollowed out box. Blackwood top.

HOLLOW FORM
7" wide
9" high
WORK BY JEAN SCHWINN

GREEN TURNED APPLE WOOD

WALNUT LIDDED BOX
5.5" x 3"

APPLE WOOD
7" x 8"
Shoe polish finish with copper wire braces

BLACK OAK VASE
6.25" x 6"
Natural Edge Black Oak Vase

BLACK OAK BOWL
7.5" x 5"
Black Oak Natural Edge Bowl

BLACK OAK HOLLOW VESSEL
5.5" x 4"

HONEY LOCUST
5.5" x 4"

APPLE WOOD BOWL
8" x 4.3"
Black Shoe Polish Finish

APPLE WOOD VASE
8" x 6"
Polished Wax Finish

APPLE WOOD NATURAL EDGE BOWL
4" x 6.25"
"Eye On You"

APPLE WOOD NATURAL EDGE BOWL
4" x 6.25"
"Eye On You"

REPLACEMENT HANDLE FOR OLD ROLLING PIN

APPLE WOOD BURL CANDLE HOLDER
6" x 6"
Lather trim and wine glass insert for candle

APPLE WOOD BURL CANDLE HOLDER
6" x 6"
Lather trim and wine glass insert for candle

CHERRY BOWL
9" x 4"

NATURAL EDGE CHERRY BOWL
10" x 7"

JUNIPER LIDDED BOXES
4.25" x 3"
4.25" x 4.25"

JUNIPER BOWL
6.75" x 3.75"

NATURAL EDGE CHERRY BOWL
10" x 6.25"

WALNUT BURL LIDDED BOX
8" x 3"

WALNUT BURL LIDDED BOX
8" x 3"

CHERRY LIDDED VESSEL WITH TWO TONE WAX FINISH
8" x 7.25"

CHERRY LIDDED VESSEL WITH TWO TONE WAX FINISH
8" x 7.25"

CHERRY NATURAL EDGE BOWL
8" x 9"

CHERRY BOWL
4.25" x 8"

APPLE BOWL
3" x 7.5"

SPALTED APPLE HOLLOW VESSEL
8" x 3.75"

MAPLE LIDDED HOLLOW FORM WITH SPINNING ANTLER TOP
7" x 10"

TRIO OF FLOWERS
8" x Various Heights
Spalted Birch

OAK VASE
8" x 7"

WHITE ASH
8.5" x 6"
Torched / Wire Brushed / Wood Burned
WORK BY JEFF MANOR

HACKBERRY & BLACK WALNUT URNS
12" tall plus final x 6"

ASH BOWL
12" in diameter

ASH PLATTER
16" in diameter

CRAB APPLE BOWL
Dyed with transol dyes, finished with Danish oil, sanding sealer, and 10 coats of spray lacquer

CRAB APPLE BOWL
Dyed with transol dyes, finished with Danish oil, sanding sealer, and 10 coats of spray lacquer

CRAB APPLE BOWL
Dyed with transol dyes, finished with Danish oil, sanding sealer, and 10 coats of spray lacquer



THIN FINIALS
Old router bit bearing with a 3/16" hole in the center

3 LOCOMOTIVE REVERSERS

RED CEDAR BOWL

CHERRY AND BLACK WALNUT

BOXELDER VASE
6" wide x 9" tall
WORK BY JEFF PETERS

NUTS WELDED TO WASHERS
Created to match the thread of my lathe to make faceplates, drive type centers, and to match my Oneway live center for custom noses.

ROTARY TEXTURING TOOL

D WAY 5/8" BOWL GOUGE
28" Custom Length

CARTER & SONS BOX SCRAPER
Made out of Spalted Crab Apple

ROUND CUTTER CARBIDE TOOL
10", 1/2" x 1/2" Shaft

ASH BOX
Dyed with Transol Dye - Finished with Lacquer

SPALTED CRAB APPLE BOWL
9" in diameter
Finished with Chroma Craft Cloud Paint

RUBBER STOPPER

FLOWERING CRAB TREE
With a Walnut Finial

MEASURING DEVICE
WORK BY ALLAN DICKMAN

WHITE PINE BOWL
12" Diameter x 6" Tall

CHERRY BOWL
12" Diameter x 7" Tall

WHITE PINE BURL BOWL
9" Diameter x 3.5" Tall

JACK PINE BURL BOWL
6" Diameter x 4.5" Tall

MAPLE & WALNUT BOWL
5.5" Tall x 14" Wide

MAPLE & WALNUT LIDDED BOWL WITH TIN ACORN KNOB
5" Tall x 6" Wide

MAPLE BOWL
19" x 9"

MAPLE BOWL
23" x 9"
WORK BY KEN BOYLES

WHITE CEDAR BOWL
7" Diameter x 2.5" Tall
The bowl on left is one we bought ar a museum store in AK years ago. It is of birch and has laser-cut butterflies around the rim. I always liked the shape of it so I recently made a copy in white cedar. The one on right was given to my wife for our 51st anniversary earlier this month.
WORK BY PERRY HIGGINS

WHITE CEDAR BOWL
7" Diameter x 2.5" Tall
The bowl on left is one we bought ar a museum store in AK years ago. It is of birch and has laser-cut butterflies around the rim. I always liked the shape of it so I recently made a copy in white cedar. The one on right was given to my wife for our 51st anniversary earlier this month.

WORK BY DOUG HANDRICK

RED CEDAR FISH
16" x 10" mouth to tail

ASH & BLOOD WOOD FLYING SAUCER
8" diameter x 10" height
Made for Wounded Warriors

CANDY BOWL
6" high x 5" wide
Coated in Poly

ASPEN BOARD STACKED VASE
8" high x 5" wide
Aspen board cut into squares and started one on another with the grain rotated on each layer then dyed yellow, red, black and blended together, with decorative curved cut into it

BOX ELDER FLOATING VASE
15" high x 5" wide
Dyed Red

POTPOURRI BOWL
3.5" high x 6.5" wide
Made from Maple

WALNUT BOWL
3.5" high x 5" wide

POLE BOARD VASES
10.5" high x 6.5" wide

STAVE BOWL
7" high x 6" wide

CHERRY BURL
12" high x 7" wide

CHERRY BURL
12" high x 7" wide

FLYING SAUCER
Spalted Maple & cherry finials

FLYING VASE
Butternut body, dyed box elder for the mount and base
WORK BY JIM ANDERSEN

STAVE BOWL
Pallet Wood & Walnut
Side Angle 45 Degrees, Miter Angle 11 Degrees, Saw Tilt 10.4 Degrees

STAVE BOWL

STAVE BOWL

STAVE BOWL

STAVE BOWL
Pine & Walnut
5" high, 8.5" wide, 41 degree side angle, 10 degree miter angle, 10.4 degree saw tilt

STAVE BOWL

STAVE BOWL

STAVE BOWL

STAVE BOWL
Pine & Walnut
5" high, 8.5" wide, 41 degree side angle, 10 degree miter angle, 10.4 degree saw tilt

STAVE BOWL

STAVE BOWL
WORK BY KEITH PILGER

ASH

ASH

SPALTED ASH

SPALTED MAPLE

SPALTED MAPLE

PECAN

SPALTED MAPLE BOWLS

MAPLE SCULPTURE
19" x 11"
WORK BY RICK GEORGESON

BARK RIMMED BOWL
Ash
4" high by 7" diameter

ASH
2.5" high by 9" diameter
WORK BY DOUG LACOUNT

BLACK LOCUST BOWL
12" wide x 8" high

SIBERIAN ELM BURL
12" wide x 4" high

SIBERIAN ELM BURL
12" wide x 3" high

BLACK WALNUT
15" wide x 11" high

BLACK WALNUT, SPALTED MAPLE, AND HONEY LOCUST MUGS

WORK BY CINDY ZUBELLA

SCARF RINGS & PINS
3" diameter
Oak, Maple, Black Walnut

BLACK WALNUT BOX WITH MAPLE TOP
4.5" high x 5.5" diameter

DYED PINE BOX WITH TRAY
4" high x 5.75" diameter

GREEN DYED OAK BOX WITH FILIGREE TOP
5.5" high x 4.5" diameter
WORK BY CHUCK FELTON

CORSET
8.5" high x 4.25" wide